A CSA approved version can be supplied in all frame sizes and also a modified version is available for DIP applications.

The TKF Flameproof Thrustor has an integral stator / rotor unit in a flameproof enclosure for use in hazardous areas, certified to BS229 for Group I & II gases (petroleum and accetone vapours).

The KT and TKF Thrustors are designed to meet all relevant British Standard requirements They are carefully inspected and tested to ensure that they comply with these requirements, and are safe in operation.

The KTX Thrustors are explosion proof thrustors certified to EEx de Zone 1 Group II gas groups A, B and C, with a temperature class T4 available in thrustor sizes 1503 and above these thrustors are slightly taller (50mm approx.) than our standard models.

The force is constant throughout the stroke and the push rod can be stopped at any point in its stroke without damage

The motor is Class F insulated as standard and the termainal box sides and cover are removeable for ease of connection of cables.

All thrustors are available with alternative mountings for interchangeability with other types if required.

TDWK brakes are suitable for a wide range of disc diameters, and can be mounted on one or both sides of a disc. The thrustor is symetrically positioned so the brake is not ‘handed’ as is usually the case with brakes of this type.

They are operated by the Witton Kramer HD thrustor which can be interchangeable with other European thrustors if required – these can be fitted without modifying the brake.

The brakes are A.C. operated from supplies up to 660 Volts, 50/60 Hz and are designed for demanding applications such as on heavy duty cranes, conveyors and process lines.

Electro-hydraulic Thrustor Operated Drum Brakes

The brakes are A.C. operated from supplies up to 660 Volts, 50/60 Hz and are designed for demanding applications such as on heavy duty cranes, conveyors and process lines.

The brakes comply with the British standard, BS 466 and with the requirements of the German standard DIN 15435 in respect of drum diameter,shoe width, shoe clearance, fixing centres and centre height, and fixing bolt holes.

They operate with special versions of the Witton Kramer HD thrustor which are interchangeable with other European thrustors if required – these can be fitted without modifying the brake.

The MEWK Brakes can also be fitted with Witton Kramer KT Industrial thrustors and TKF Flameproof thrustors.

The brakes are A.C. operated from supplies up to 660 Volts, 50 / 60 Hz and are designed for demanding applications such as on heavy duty cranes, conveyors and process lines.

The brakes comply with the British standard, BS 466 and with the requirements of the German standard DIN 15435 in respect of drum diameter and width, shoe clearance, fixing centres and centre height, and fixing bolt holes.